Chinese Set Homepage    Add Favorite

R & D system

News

 Your Location :  Home > Ultrasonic Cleaning Machine operation and maintenance guidelinesUltrasonic Cleaning Machine operation and maintenance guidelines

Ultrasonic Cleaning Machine operation and maintenance guidelines
 <Li Han Customer Service Department companies Manager Xu>
 

 1.Firstly,Operationguideline:
 
1, Check the cleaning tank to ensure there is adequate water inside(water level at least should be higher thantransducer box 200mm ).
 2,  According to the technical requirements adding an appropriate cleaning agent.
 3,  Adjust the power switch to a minimumposition
 4, Close the power switch or the power cable plug in the power outlet .
 5, Open the power switch, Adjust the"power conditioning" powerswitch adjust to the power of the needs, ultrasonic cleaning machines start work.
6, whenstop working, adjust"power conditioning" to minimizeposition, close the power switch.


Secondly, maintenance guidelines:
1, if this equipment does not use for a long time, please cleaning the cleaning fluid and cleaning the tank .
2, if this equipment does not use for a long time, please follow the step guide and operate this equipment one time per month and working half hour.
3, If had technical problems, please notice us immediately.
Lastly, warning:  
 
1, Don't open the cleaning machine when the tank without water. 
2, Don't start high-power directly.  
3, If had high concentrations of corrosive gases at the scene, please leave away the ultrasonic cleaning tank system as far as possible
4, Don't touch the generator electronic components When turned on and off the switch within 30 minutes, because there are high-voltage capacitors stored there.